A-1 series reversible diatomite filter
The A-1 series reversible diatomite filter is a kind of internationally advanced filtration equipment popularly used for swimming pool etc., which is made with cooperation of Tianjin Taipingyang (TPY) Mecha-Electronic Technique & Equipment Co., Ltd. and MIURA Chemical Equipment Co., Ltd, It is manufactured by TPY with the technology of MIURA of Japan with diatomite as the filtration aid and the special structure 5-way valve to complete coating filtration, convertible washing, being able to filter solid suspended matter like colibacillus and alga less than 1μm, up to the precision below 3 degrees. The equipment is featured by advanced technology, steady property, reliable quality, easy maintenance and repairing, light weight and small size, low consumption of power and operational cost etc.
A--1 series reversible filter with diatomite as filtration aid is a type of environmental friendly product, which can save water and is good to the health of the swimmer. It adopts cycling purification treatment and this represents an inevitable trend of modern social development.
Characteristics of A--1 series diatomite reversible filter
- The filtration provision can range 1－3μm.
- The machine can be cleaned within 1-3 minutes with a small amount of water.
- Structure made of steel is more durable than that made by polythene
- Cost can be lower due to its lightweight, small space for its installation and operation and energy saving device.
Outstanding features of the fully automatic filter
- Operation can be simplified by using control device to finish high provision performance of the equipment.
- Control the pressure and time of the water quality of the swimming pool.
Classification of A--1 series reversible filter
Parameters of manual A-1 series reversible filter
| Manual standard type | Filtration ability (m3/H) | Filtration area (㎡) | Filter pump (m3/H) | Motor (Kw) | Internal pipe (A) | Size of filter(mm) | Machine room | |||
| W | L | H | Length×width(m) | Area(㎡) | ||||||
| PA 12-202 | 10—15 | 2 | 12 | 2.2 | 50 | 2070 | 1300 | 1610 | 3×3 | 9 |
| PA 24-203 | 24—30 | 3 | 24 | 3.0 | 65 | 2150 | 1300 | 1610 | 3×3 | 9 |
| PA 40-204 | 40—55 | 4 | 40 | 4.0 | 80 | 2170 | 1130 | 1620 | 3×3 | 9 |
| PA 60-206 | 60—80 | 6 | 60 | 5.5 | 100 | 2640 | 1220 | 1650 | 4×3 | 12 |
| PA 100-215 | 100—120 | 10 | 100 | 7.5 | 125 | 2820 | 1820 | 1710 | 4×4 | 16 |
| PA 150-225 | 150—170 | 15 | 150 | 11.0 | 125 | 2820 | 1820 | 1740 | 4×5 | 20 |
| PA 200-230 | 200—230 | 25 | 200 | 15.0 | 150 | 3000 | 3800 | 2000 | 5×5 | 25 |
| PA 250-230 | 250—280 | 30 | 250 | 18.5 | 200 | 3000 | 4000 | 2200 | 6×6 | 36 |
| PA 300-240 | 300—330 | 40 | 300 | 22.0 | 200 | 3000 | 4000 | 2200 | 6×7 | 42 |
| PA 400-250 | 400—450 | 50 | 400 | 30.0 | 250 | 5000 | 4200 | 2400 | 7×8 | 56 |
| PA 500-260 | 500—550 | 60 | 500 | 37.0 | 250 | 6000 | 4200 | 2400 | 7×9 | 63 |
Parameters of Fully Automatic A-1 series reversible filter
| Standard type | Filtration ability(m3/H) | Filtration area (㎡) | Filter pump(m3/H) | Motor(Kw) | Internal pipe(A) | Size of filter(mm) | Machine room | Air compressor(Kw) | vibrating spiral device(Kw) | |||
| W | L | H | Length×Width(m) | Area(㎡) | ||||||||
| PA 12-202AT | 10—15 | 2 | 12 | 2.2 | 50 | 2070 | 1300 | 1610 | 3×4 | 12 | 0.2 | 0.02 |
| PA 24-203AT | 24—30 | 3 | 24 | 3.0 | 65 | 2150 | 1300 | 1610 | 3×4 | 12 | 0.2 | 0.02 |
| PA 40-204AT | 40—55 | 4 | 40 | 4.0 | 80 | 2170 | 1130 | 1620 | 4×4 | 16 | 0.2 | 0.02 |
| PA 60-206AT | 60—80 | 6 | 60 | 5.5 | 100 | 2640 | 1220 | 1650 | 4×5 | 20 | 0.2 | 0.02 |
| PA 100-210AT | 100—120 | 10 | 100 | 7.5 | 125 | 2820 | 1820 | 1710 | 5×5 | 25 | 0.2 | 0.02 |
| PA 150-215AT | 150—170 | 15 | 150 | 11.0 | 125 | 2820 | 1820 | 1740 | 5×6 | 30 | 0.4 | 0.02 |
| PA 200-225AT | 200—230 | 25 | 200 | 15.0 | 150 | 4000 | 3800 | 2300 | 6×6 | 36 | 0.275 | |
| PA 250-230AT | 250—280 | 30 | 250 | 18.5 | 200 | 4000 | 4000 | 2300 | 6×7 | 42 | 0.275 | |
| PA 300-240AT | 300—330 | 40 | 300 | 22.0 | 200 | 5000 | 4000 | 2300 | 7×8 | 56 | 0.275 | |
| PA 400-250AT | 400—450 | 50 | 400 | 30.0 | 250 | 6000 | 5200 | 2400 | 8×10 | 80 | 0.35 | |
| PA 500-260AT | 500—550 | 60 | 500 | 37.0 | 250 | 7000 | 5200 | 2400 | 10×10 | 100 | 0.35 | |
A-1 series reversible diatomite filter is mainly composed of hair catcher, aid pot, cycling pump, 5-way valve, instrument, pipe arrangement, electricity cage etc. Our company can also provide other equipment including sterilizer, heat exchanger and monitoring device. According to users' special demands, we can offer other services like swimming pool design, equipment installation and adjustment as well as training of personnel etc.
Structural drawings of A-1 series reversible filter
Working principle of A-1 series reversible filter
Achievements
Swimming in clear water may be a long aspiration of all of us. However, only A-1 series reversible filter can help us realize such an aspiration. As the most advanced filtration equipment, MIURA-TPY A-1 series reversible filter is able to remove solid suspended matter of 1-3μm. The total sales of the most advanced filter has amounted to15, 000 sets so far.
Swimming pool for World Student's Game in Beijing of China
Swimming pool for Olympic Game in Seoul of ROK
Swimming pool for World Cup Competition
Swimming pool for Asian Game in Hiroshima of Japan
